Calibration & Validation

Home / Services Detail

Biomedical and Hospital Equipment Calibration

The Biomedical Calibration is important because they establish whether the medical devices are appropriate, according to the international standards or not. The calibration also helps to minimize misdiagnosis caused by poorly calibrated machine. It is very important to configure hospital systems, according to the standard calibration because these machines need to be absolutely accurate since it is a matter of life and death.

Medical devices can drift away from the measurements due to their internal components. This phenomenon is common among all manufacturers, even with the most advanced ones. Over time, the internal components – both mechanical and electronics wear and tear. As a result, their performance starts to decrease and results in erratic readings. These erratic readings can directly affect the patient life, such as in the case of ultrasound units.

We have the following dedicated services :

01

Force-UTM, CTM etc

We provide calibration services for testing machines like

  1. 1 . Universal Testing machine
  2. 2 . Compression Testing Machine
  3. 3 . Tensile testing machines Calibration Ranges-500N to 3000KN (Compression) 50 N to 10KN(Tension)
  4. 4 . Impact Tester
  5. 5 . Hardness Tester

02

Weighing Balances & Weights

Provide reliable Calibration services of Weighing Balances and weights for accurate measurements. Both on site and lab facility available.

Calibration Ranges

  1. 1 . OIML Weights Class F2, E1, E2, M1 & M2, 10 mg to 20 kg
  2. 2 . Analytical Balances and Weighing Scales –0 to 60kg

03

Temperature & Humidity

Calibration services for Temperature and Humidity available.

Temperature

  1. 1 . Liquid Glass Thermometer, Temperature Gauge, Dial Thermometer etc, Range -80 ºC to 250ºC
  2. 2 . RTD, Thermocouple (with or without Indicator), Temperature Indicator, Range -80ºC to 1500ºC
  3. 3 . Temperature Indicator of Cold Chambers, Ovens, Incubators, Furnace, Baths etc, Range -80ºC to 1500ºC
  4. 4 . Temperature Mapping of Freezer, Ovens, Indicators, Environmental Chambers, Liquid Bath & Data Logger with Sensor, Range -30ºC to 300ºC

Humidity

  1. 1 . Humidity Meter, Thermo-Hygrometer etc, Range- 25% to 95%RH @25ºC, 15 to 40 ºC @50%RH.
  2. 2 . Condition Chamber, Humidity Indicator etc, Range- 25% to 95%RH @25ºC, 15 to 45 ºC @50%RH.

04

Metrology (Dimensions)

# Instrument Range
1 Caliper (Vernier/Dial/Digital) 0 to 600mm.
2 External Micrometer 0 to 200mm.
3 Depth Micrometer 0 to 25mm.
4 Height Gauge 0 to 600mm.
5 Plunger Type Dial Gauge 0 to 25mm.
6 Lever Type Dial Gauge 0 to 0.8mm.
7 Inside Dial caliper 18mm to 150mm.
8 Dial Thickness Gauge 0 to 10mm.
9 Feeler Gauge 0 to 1 mm.
10 Test Sieves 0.045 to 100mm
Civil Lab equipments calibrations

05

Glassware

Calibration services for glassware provided.

06

HVAC Validations

Undertake Clean Room Validation test like :

  1. 1 . Air Changes Test
  2. 2 . Air Borne Particle Count Test
  3. 3 . Hepa Filter Integrity Test
  4. 4 . Air Flow Pattern Test

07

Temperature & Rh Mapping

Temperature & Rh Mapping for Pharma plants, Hospitals and all critical places where Temperature & Rh play a crucial role.

08

Biomedical and Hospital Equipment Calibration

The Biomedical Calibration is important because they establish whether the medical devices are appropriate, according to the international standards or not. The calibration also helps to minimize misdiagnosis caused by poorly calibrated machine. It is very important to configure hospital systems, according to the standard calibration because these machines need to be absolutely accurate since it is a matter of life and death.

Medical devices can drift away from the measurements due to their internal components. This phenomenon is common among all manufacturers, even with the most advanced ones. Over time, the internal components – both mechanical and electronics wear and tear. As a result, their performance starts to decrease and results in erratic readings. These erratic readings can directly affect the patient life, such as in the case of ultrasound units.

Secondly, as mentioned above, regulatory bodies such as the FDA in the US have made it mandatory for the manufacturers to perform routine calibration and maintain calibration records. Otherwise, the manufacturer is not granted accreditation and is not allowed to start or continue its operations.

The calibration process is necessary to detect these erratic readings and comply with the regional regulatory bodies. The calibration must be regularly performed, and documentation maintained for presenting during a routine inspection.

OUR WORKING PROCESS

EXPLORE OUR MAIN SERVICE

MAKE AN APPOINTMENT

<

STAY IN TOUCH